Brother NX-200 Manuel d'utilisateur télécharger pdf (Page 83)

Appliqué, Patchwork and Quilt Stitching 77

GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX

Appliqué stitching

Cut out the appliqué, leaving a seam

allowance of between 3 and 5 mm

(1/8 and 3/16 inch).

1 Seam allowance

Place a pattern made of thick paper on the

back of the appliqué, and then fold over the

seam allowance using an iron.

• Remove the thick paper after pressing the

seam allowance.

Turn the fabric over, and then baste or pin it

onto the fabric that it will be attached to.

1 Basting stitching

Attach zigzag foot “J”.

• For details, refer to “Replacing the presser

foot” (page 29).

Select a stitch.

• For details, refer to “Selecting stitching”

(page 54).

Turn the balance wheel toward you, and then

begin sewing around the edge of the appliqué,

making sure that the needle drops just outside

of the appliqué.

When sewing around corners, stop the

machine with the needle in the fabric just

outside of the appliqué, raise the presser foot

lever, and then turn the fabric as needed to

change the sewing direction.

F0_brotherE.book Page 77 Wednesday, May 21, 2003 11:38 AM

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 110 111

Pas de commentaire

Brother NX-200 Manuel d'utilisateur Page 83