Brother NX-200 Manuel d'utilisateur télécharger pdf (Page 44)

SEWING BASICS ———————————————————————————————————————————————————————

—

GETTING READYCONTENTS SEWING BASICS UTILITY STITCHES APPENDIX INDEX

Positioning the fabric

Be sure that the fabric pieces are sewn in the correct

order and that the right and wrong sides of the fabric

are aligned correctly.

Turn on the sewing machine.

The straight stitch (left needle position) is

automatically selected.

Press (needle position button) once or

twice to raise the needle.

1 Needle position button

Place the fabric under the presser foot.

• If the seam allowance is positioned on the

right side, sewing in a straight line is easier

and the extra fabric does not get in the way.

While holding the end of the thread and the

fabric with your left hand, turn the balance

wheel toward you with your right hand to

lower the needle to the starting point of the

stitching.

Lower the presser foot lever.

1 Presser foot lever

X The fabric is now positioned to be sewn.

Memo

● To adjust the pressure that the presser foot

applies to the fabric, refer to “Adjusting the

pressure of the presser foot” (page 30).

F0_brotherE.book Page 38 Wednesday, May 21, 2003 11:38 AM

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 110 111

Pas de commentaire

Brother NX-200 Manuel d'utilisateur Page 44