Brother HL-4200CN Manuel d'utilisateur télécharger pdf (Page 24)

TCP/IP PRINTING 2 - 4

The standard TCP/IP Port Wizard will start. Follow steps 6-10 of the “Standard TCP/IP Port

Printing” section.

Windows NT

4.0 Printing

If you did not install the TCP/IP protocol or the Microsoft TCP/IP Printing during the installation of your

Windows NT

4.0 system (either workstation or server) follow these steps. Please note that it is essential

that you install the Microsoft TCP/IP Printing protocol if you wish to print over the network using the TCP/

IP protocol. If you have already installed the TCP/IP protocol, proceed to the next section.

Step1 : Running the Network applet, click on the Protocols tab.

Select Add, and double click on TCP/IP protocol.

Ins

ert the requested disk(s), or CD-ROM, to copy the required files.

Click on the

Services

tab, click on

Add

and double click on

Microsoft TCP/IP Printing

Again insert the requested disk(s) or CD-ROM.

Click on the

Protocols

tab when then copying is finished.

Double click on the

TCP/IP Protocol

option and add the host IP address, subnet mask, and gateway

address. Consult your administrator for these address.

Click

twice to exit. (Your NT server will need to be re-booted.)

Windows

NT 4.0 Printing (Printer Driver not yet installed)

Go to the Start button, choose Settings, and then select Printers.

Double click the Add Printer icon to get the Add Printer Wizard. Select My Computer (Not Network

Printer) and click on Next.

Select Add Port, select LPR Port (LPR Port will not be displayed unless you install the “Microsoft

TCP/IP Printing” protocol as described earlier) from the list of available ports and click on New Port.

Type in the IP address that you wish to assign to the print server in the Name or address of server

providing lpd: box. If you have edited your HOSTS file or are using Domain Name System, enter the

name associated with the print server, instead of an IP address. As the print server supports TCP/

IP and NetBIOS names, you can also enter the NetBIOS name of the print server. The NetBIOS

name can be seen in your printer settings page. From default the NetBIOS name will usually appear

as “BRN_xxxxxx” where xxxxxx is the last six digits of the Ethernet dress.

Type in the print server service name in the Name of printer or print queue on that server: box. If

you do not know which service name to use, enter BINARY_P1 and then click on OK.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 62 63

Commentaires sur ces manuels

Pas de commentaire

Brother HL-4200CN Manuel d'utilisateur Page 24

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimeurs Brother HL-4200CN