Brother HL-4200CN Manuel d'utilisateur télécharger pdf (Page 16)

UNIX PRINTING 1 - 6

The procedure for pre-V4.0 systems is as follows.

Enter smit and select devices.

Select printer/plotter.

Select manage remote printer subsystem.

Select client services.

Select remote printer queues.

Select add a remote queue.

Enter the following remote queue settings:

■ Name of queue to add (user selectable).

■ Activate the queue (Yes).

■ Destination host (print server name; must match name in /etc/hosts file or use the print

server IP address)

■ Name of queue on remote printer (We recommend using “BINARY_P1” for the queue name).

■ Name of device to add (user selectable; for example lp0).

Sun Solaris 2.x Configuration

Sun Solaris 2.x uses the lpsystem and lpadmin programs for remote printer configuration:

lpsystem -t bsd prnservername

lpadmin -p queue -s prnservername!prnserverservice

accept queue (not required on newer Solaris systems)

enable queue (not required on newer Solaris systems)

Where queue is the name of the local print queue.

prnservername is the name of the print server (must match the entry in the /etc/hosts file or IP

address).

prnserverservice is BINARY_P1service.

If this is the first printer configured, you must also use the lpsched command prior to the accept

command.

As an alternative, you may use Printer Manager in the Admintool utility under OpenWindows. Select

Edit, Add, and Add Access to Remote Printer. Then enter the print server name in the format

prnservername!\prnserverservice as described above. Make sure that the printer server OS is

set to BSD (the default setting), and click Add.

Note that we recommend that you use the /etc/hosts file for the printer name rather than NIS or other

name services. Also note that due to a bug in the Sun lpd implementation on Solaris 2.4 and earlier

releases, you may experience problems printing very long print jobs. If this is the case, a workaround is

to use the raw TCP port software as described later in this chapter.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 62 63

Pas de commentaire

Brother HL-4200CN Manuel d'utilisateur Page 16