Brother DCP 9040CN Manuel d'utilisateur télécharger pdf (Page 15)

Configuring your network printer

If you do not have a DHCP/BOOTP/RARP server, the Automatic Private IP Addressing (APIPA) protocol will

automatically assign an IP address from the range 169.254.1.0 to 169.254.254.255. For more information on

APIPA, see Using APIPA to configure the IP address on page 81.

If the APIPA protocol is disabled, the IP address of a Brother print server is 192.0.0.192. However, you can

easily change this IP address number to match with the IP address details of your network. For information

on how to change the IP address, see Setting the IP address and subnet mask on page 10.

Subnet mask 2

Subnet masks restrict network communication.

 Example: Computer1 can talk to Computer 2

• Computer 1

IP Address: 192.168.1.2

Subnet Mask: 255.255.255.0

• Computer 2

IP Address: 192.168.1.3

Subnet Mask: 255.255.255.0

Note

0 denotes that there is no limit to communication at this part of the address.

In the above example, we can communicate with anything that has an IP address that begins with

192.168.1.x.

Gateway (and router) 2

A gateway is a network point that acts as an entrance to another network and sends data transmitted via the

network to an exact destination. The router knows where to direct data that arrives at the gateway. If a

destination is located at an external network, the router transmits data to the external network. If your network

communicates with other networks, you may need to configure the Gateway IP address. If you do not know

the Gateway IP address then contact your Network Administrator.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 101 102

Pas de commentaire

Brother DCP 9040CN Manuel d'utilisateur Page 15