Brother MFC 9970CDW Manuel d'utilisateur télécharger pdf (Page 48)

Chapter 6

40

External and extension

telephones 6

Note

You need to turn the Remote Codes

setting to on to use the Remote Activation

Code l51 and Remote Deactivation Code

#51. (See Using Remote Codes

on page 41.)

Connecting an external or

extension telephone 6

You can connect a separate telephone

directly to your machine as shown in the

diagram below.

1 Extension telephone

2 External telephone

3 Protective Cap

When you are using an external telephone,

the LCD shows Telephone.

Operation from external or

extension telephones 6

If you answer a fax call on an extension

telephone, or an external telephone that is

correctly connected to the machine through

the T-piece connection, you can make your

machine take the call by using the Remote

Activation code. When you press the Remote

Activation code l51 the machine starts to

receive the fax.

If you answer a call and no one is on

the line: 6

You should assume that you’ re receiving a

manual fax.

Press l51 and wait for the chirp or until the

LCD shows Receiving, and then hang up.

Note

You can also use the Fax Detect feature to

make your tactically take the call. (See

Fax Detect on page 36.)

For Fax/Tel mode only 6

When the machine is in Fax/Tel mode, it will

use the F/T Ring Time (fast double-ringing) to

alert you to pick up a voice call.

Lift the external telephone’ s handset, and

then press Tel/R to answer.

If you are at an extension telephone, you will

need to lift the handset during the F/T Ring

Time and then press #51 between the fast

double-ringings. If no one is on the line, or if

someone wants to send you a fax, send the

call back to the machine by pressing l51.

Using a non-Brother cordless

external handset 6

If your non-Brother cordless telephone is

connected to the telephone line cord (see

page 40) and you typically carry the cordless

handset elsewhere, it is easier to answer

calls during the Ring Delay.

If you let the machine answer first, you will

have to go to the machine so you can press

Tel/R to transfer the call to the cordless

handset.

1

2

3

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 217 218

Commentaires sur ces manuels

Pas de commentaire