Brother HL 1270N Manuel d'utilisateur télécharger pdf (Page 63)

6-2

Creating a Print Queue Using

BRAdmin32

Brother’s BRAdmin32 utility are Windows-based applications that provide similar

functionality to the Netware PCONSOLE utility (or the NWADMIN utility in Netware 4.1x or

later). To use the BRAdmin32 programs to configure a Brother print server under NetWare,

make sure that you are logged in as SUPERVISOR (NetWare 2.xx or 3.xx) or ADMIN

(NetWare 4.1x or later) and perform the following steps:

Configuring the Brother Print Server (Queue Server Mode in Bindery emulation

mode) using BRAdmin32

1. Make sure that you logged in as SUPERVISOR (Netware 2.xx or 3.xx) or ADMIN

(Netware 4.xx or later).

2. Start BRAdmin32.

3. One or more print server will appear in the list (the default node names are BRN_xxxxxx,

where "xxxxxx" is the last six digits of the Ethernet address (MAC address)).

✒ Note

You can find the node name and MAC address by printing out the printer configuration page.

Refer to the Quick Setup Guide for information on how to print the configuration page on your

print server.

4. Select the print server that you wish to configure and double click it.

You will be asked

for a password. The default password is "access".

5. Select the Netware tab.

✒ Note

If necessary change the “Print Server Name”, the default Netware print server name will be

BRN_xxxxxx_P1 where xxxxxx is the Ethernet address of the print server. Be careful!

Changing the name may impact the configuration of other protocols because the print server

service names will be altered.

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 121 122

Pas de commentaire

Brother HL 1270N Manuel d'utilisateur Page 63