Brother HL 1270N Manuel d'utilisateur télécharger pdf (Page 45)

4–1

Chapter 4

How to Configure Peer-to-Peer (NetBIOS)

printing for Windows 95/98/NT, LAN Server and

OS/2 Warp Server

Introduction

Brother’s Print Server range supports SMB (Server Message Block) over the TCP/IP protocol

via the NetBIOS interface. This allows direct printing on Microsoft-compatible networks.

Because Brother print servers support the SMB protocol over TCP/IP, Brother print server

will appear in your network neighborhood.

In order for this function to work, you must correctly change the DOMAIN name or

WORKGROUP name to match that of your network. Once this is done, the print server will

appear automatically in your network neighborhood and you will be able to send print

documents to it without having to install additional software. However, in some instances you

may find that your Windows 95/98 and Windows NT4.0 systems may receive "Printer is

busy" error messages when more that one person attempts to access the print. In this instance

Brother have provided the "Brother NetBIOS Port Monitor" software which allows users to

continue spooling print jobs while the printer is busy, down or out of paper. The port monitor

will hold the jobs until the printer is again available.

✒ Note

Your computer and print server must have a valid IP address. As for the configuration of

TCP/IP network, refer to the chapter “How to Configure TCP/IP printing for Windows NT,

LAN Server and OS/2 Warp Server” and “How to Configure Peer-to-Peer Printing for

Windows 95/98” chapters of this user guide.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 121 122

Pas de commentaire

Brother HL 1270N Manuel d'utilisateur Page 45