Brother DCP-J140W Manuel d'utilisateur télécharger pdf (Page 29)

Control panel setup

WPS w/PIN Code 4

If your WLAN access point/router supports Wi-Fi Protected Setup (PIN Method), you can configure the

machine easily without a computer. (See Configuration using the PIN Method of Wi-Fi Protected Setup

uu page 13.)

WLAN Status 4

Status 4

This field displays the current wireless network status.

Signal 4

This field displays the current wireless network signal strength.

SSID 4

This field displays the current wireless network SSID. The display shows up to 32 characters of the SSID

name.

Comm.Mode 4

This field displays the current wireless network communication mode.

MAC Address 4

The MAC address is a unique number assigned to the machine's network interface. You can check your

machine's MAC address from the control panel.

WLAN Enable 4

If you want to use the wireless network connection, set 7.WLAN Enable to On. The default setting is Off.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 40 41

Pas de commentaire

Brother DCP-J140W Manuel d'utilisateur Page 29