Brother DCP-J140W Manuel d'utilisateur télécharger pdf (Page 27)

Control panel setup

IP Address 4

This field displays the current IP address of the machine. If you have chosen a 1.BOOT Method of Static,

enter the IP address that you wish to assign to the machine (check with your network administrator for a

suitable IP address to use). If you have chosen a method other than Static, the machine will attempt to

determine its IP address using the DHCP, BOOTP or RARP protocols. The default IP address of your

machine will probably be incompatible with the IP address numbering scheme of your network. We

recommend that you contact your network administrator for a suitable IP address for the network the unit will

be connected on.

Subnet Mask 4

This field displays the current subnet mask used by the machine. If you are not using DHCP or BOOTP to

obtain the subnet mask, enter the desired subnet mask. Check with your network administrator for the subnet

mask to use.

Gateway 4

This field displays the current gateway or router address used by the machine. If you are not using DHCP or

BOOTP to obtain the gateway or router address, enter the address you wish to assign. If you do not have a

gateway or router, leave this field blank. Check with your network administrator if you are unsure.

Node Name 4

You can register the machine name on the Network. This name is often referred to as a NetBIOS name; it will

be the name that is registered by the WINS server on your network. Brother recommends the name

BRWxxxxxxxxxxxx for a wireless network (where xxxxxxxxxxxx is your machine’s Ethernet address) (up to

15 characters).

Note

DCP models cannot change the Node Name from the control panel menu.

WINS Config 4

This selection controls how the machine obtains the IP address of the WINS server.

Auto 4

Automatically uses a DHCP request to determine the IP addresses for the primary and secondary WINS

servers. You must set the 1.BOOT Method to Auto or DHCP for this feature to work.

Static

Uses a specified IP address for the primary and secondary WINS servers.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 40 41

Pas de commentaire

Brother DCP-J140W Manuel d'utilisateur Page 27