Brother XT37 Manuel d'utilisateur télécharger pdf (Page 40)

SEWING BUTTONHOLES AND BUTTONS ————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

—

———————————————————————————————————————

—————

If the left side is too open, turn the buttonhole

fine-adjustment screw with a large

screwdriver in the

“–” direction.

If the left side is too tight, turn the buttonhole

fine-adjustment screw with a large

screwdriver in the

“+” direction.

• This adjustment ensures both sides of the

buttonhole are the same.

Sewing buttons

Measure the distance between the

buttonholes and mark the fabric. Then

adjust the stitch width so that it is the

same as the distance between the holes in

the button.

Raise the presser foot lever, and then slide

the feed dog position switch to (see

page 13).

Turn off the machine.

Change the foot to the button sewing foot

“M”.

Turn on the machine.

Put a button between the foot and the

fabric and make sure that the needle enters

the holes without hitting the button. If it

hits, see step

At a slow speed, sew about 10 stitches.

CAUTION

Pull the upper thread at the end of the

stitching to the wrong side of the fabric,

and then tie it with the bobbin thread.

X Use scissors to cut the upper thread and

the bobbin thread at the beginning of the

stitching.

When you are finished attaching the

button, slide the feed dog position switch

to (see page 13), and turn the

handwheel to raise the dogs.

Memo

● The feed dog position switch is normally set

to the right side.

● The feed dogs come up when you start

sewing again.

Stitch

Name

Pattern

Stitch

Length

[mm

(inch)]

Stitch

Width

[mm

(inch)]

Foot

Zigzag

Stitch

(1/64)

Any

Button sewing

foot “M”

● Make sure the needle does not hit the

button during sewing. The needle may

break and you may be injured.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

Brother XT37 Manuel d'utilisateur Page 40

Commentaires sur ces manuels

Produits connexes et manuels pour Machines à coudre Brother XT37