Brother NX-200 Manuel d'utilisateur télécharger pdf (Page 30)

GETTING READY ——————————————————————————————————————————————————

—

Select a stitch.

• For details on selecting a stitch, refer to

“Selecting Stitching” (page 54).

• For details on the stitches that can be sewn

with the twin needle, refer to “Stitch

Settings” (page 92).

• Select a stitch width of 5.0 mm (3/16 inch) or

less.

Start sewing.

• For details on starting to sew, refer to

“Starting to sew” (page 39).

X Two lines of stitching are sewn parallel to

each other.

Using thread that winds off

quickly

When using thread that winds off quickly, such as

transparent nylon thread or metallic thread, place the

enclosed spool net over the spool before placing the

spool of thread onto the spool pin.

If the spool net is too long, fold it to fit the size of the

spool.

1 Spool net

2 Spool

3 Spool cap

4 Spool pin

●

When using the twin needle, be sure to

select an appropriate stitch, otherwise

the needle may break or the machine

may be damaged.

●

Select a stitch width of 5.0 mm (3/16

inch) or less, otherwise the needle may

break or the machine may be damaged.

●

After adjusting the stitch width, slowly

turn the balance wheel toward you and

check that the needle does not touch the

presser foot. If the needle hits the presser

foot, the needle may bend or break.

●

When changing the sewing direction,

press (needle position button) to

raise the needle from the fabric, and then

raise the presser foot lever and turn the

fabric.

CAUTION

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 110 111

Commentaires sur ces manuels

Pas de commentaire

Brother NX-200 Manuel d'utilisateur Page 30

Commentaires sur ces manuels

Produits connexes et manuels pour Machines à coudre Brother NX-200