Brother NX-200 Manuel d'utilisateur télécharger pdf (Page 18)

GETTING READY ——————————————————————————————————————————————————

—

Winding/Installing the Bobbin

This section describes how to wind the thread onto the bobbin, and then insert the bobbin thread.

Bobbin precautions

Be sure to observe the following precautions concerning the bobbin.

Winding the bobbin

Wind the thread around the bobbin to prepare the bobbin thread.

1 Bobbin winder

Memo

● The order that the machine should be threaded for winding the bobbin is indicated by a broken line on

the sewing machine. Be sure to thread the machine as indicated.

●

Only use the bobbin (part code: SA156, XA5539-151) designed specifically for this sewing

machine. Use of any other bobbin may result in injuries or damage to the machine.

●

The enclosed bobbin was designed specifically for this sewing machine. If bobbins from older

models are used, the machine will not operate correctly. Use only the enclosed bobbin or

bobbins of the same type (part code: SA156, XA5539-151).

CAUTION

Actual size

This model Older model

11.5 mm

(7/16 inch)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 110 111

Pas de commentaire

Brother NX-200 Manuel d'utilisateur Page 18