Brother DCP 8060 Manuel d'utilisateur télécharger pdf (Page 109)

6. Brother PC-FAX Software (Not available for DCP models)

103

PC-FAX receiving 6

Note

• To use PC-FAX receiving, you must log on with Administrator rights.

• Network PC-FAX receiving is not supported in Windows NT

4.0.

• If your PC is protected by a firewall, and is unable to use PC-FAX receiving, you may need to configure

the firewall settings to allow communication through port number 137 and 54926. Visit the Brother

Solutions Center (http://solutions.brother.com

) for more information.

• Depending on the Operating System you are using you may get a Security Alert message when you start

the PC-FAX receiving feature. To enable PC-FAX receiving, you must unblock the program.

The Brother PC-FAX Receiving Software lets you view and store faxes on your PC. It is automatically

installed when you install the MFL-Pro Suite and works on locally or network connected machines.

When enabled, your machine will receive faxes in its memory. Once it has received the fax, it will be

automatically sent to your PC.

If you turn your PC off, your machine will continue to receive and store your faxes in its memory. The machine

LCD will display the number of stored faxes received, for example:

PC Fax Msg:001

When you switch your PC on and the PC-FAX Receiving Software automatically transfers your faxes to your

PC.

To enable the PC-FAX Receiving Software, do the following:

 Before you use the PC-FAX Receive function, you must PC-FAX Receive from the menu on the machine.

(See Enabling PC-FAX on your machine on page 104)

 Run the Brother PC-FAX Receiving software on your PC. (We recommend to choose the Add to Startup

folder check box, so that the software automatically runs and can transfer any faxes on PC startup.)

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 181 182

Pas de commentaire

Brother DCP 8060 Manuel d'utilisateur Page 109