Brother SM1704 Manuel du propriétaire télécharger pdf (Page 42)

APPENDIX ————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————

—

——————————————————————————————————————————————————————————————————————————————————————————————————————————————

—————

Use the cleaning brush or a vacuum

cleaner to remove any dust from the

bobbin race and its surrounding area.

1 Cleaning brush

2 Race

• Do not apply oil to the bobbin case.

Insert the bobbin case so that the ▲ mark

on the bobbin case aligns with the ● mark

on machine as shown below.

• Align the ▲ and ● marks.

1 ▲ mark

2 ● mark

3 Bobbin case

• Make sure that the indicated points are

aligned before installing the bobbin case.

Install the needle plate, and then tighten

the screws.

1 Screws

• Make sure that you install the needle plate

securely.

CAUTION

● Never use a bobbin case that is

scratched; otherwise the upper thread

may become tangled, the needle may

break, or sewing performance may

suffer. For a new bobbin case (part code:

XE9326-001), contact your nearest

authorized Brother Service Center.

● Make sure that you fit the bobbin case

properly, otherwise the needle may

break.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 93 94

Pas de commentaire

Brother SM1704 Manuel du propriétaire Page 42