Brother MW-260 Manuel d'utilisateur télécharger pdf (Page 29)

2-3) Line feed amount commands

ESC 0 Specify line feed of 1/8"

[ASCII] ESC 0

[Decimal] 27 48

[Hexadecimal] 1B 30

[Parameters] None

[Description]

・ Specifies a line feed amount of 1/8" (approximately 0.32 cm).

・ A line feed sets 38 dots (38 dots / 300 dpi).

ESC 2 Specify line feed of 1/6"

[ASCII] ESC 2

[Decimal] 27 50

[Hexadecimal] 1B 32

[Parameters] None

[Description]

・ Specifies a line feed amount of 1/6" (approximately 0.42 cm).

・ A line feed sets 50 dots (50 dots / 300 dpi).

ESC 3 Specify line feed amount in minimum units

[ASCII] ESC 3 n

[Decimal] 27 51 n

[Hexadecimal] 1B 33 n

[Parameters] 0≤n≤255

[Description]

・ Specifies a line feed amount of n/300" each text line.

ESC A Specify line feed amount of n/60"

[ASCII] ESC A n

[Decimal] 27 65 n

[Hexadecimal] 1B 41 n

[Parameters] 0≤n≤255

[Description]

・ Specifies a line feed amount of n/60".

・ Therefore, n=1 will feed 5 dots (n 1 = 5 dots / 300 dpi).

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 57 58

Pas de commentaire

Brother MW-260 Manuel d'utilisateur Page 29