Brother MW-260 Manuel d'utilisateur télécharger pdf (Page 27)

ESC SP Select character spacing for ANK characters

[ASCII] ESC SP n

[Decimal] 27 32 n

[Hexadecimal] 1B 20 n

[Parameters] 0≤n≤127

[Description]

・ Specifies the character spacing.

・ The default setting is n=0.

ESC X Select alphanumeric/kana character size

[ASCII] ESC X m nL nH

[Decimal] 27 88 m nL nH

[Hexadecimal] 1C 58 m nL nH

Bitmap fonts (MW-120 / MW-120 TypeF / MW-140BT / MW-140BT TypeF / MW-145BT / MW-260)

[Parameters] Character width: The value of m is irrelevant.

Character size: nL = 24, 32, or 48 dots

Available only when nH=0.

[Description]

・ This command is only used to change the size.

・ Underlining must not be specified.

・ Character width cannot be specified.

・ The character size is set to n=nL+nH*256 dots.

・ The width and the height is the same size.

・ Only n=24, 32, or 48 are available.

** These parameters are supported by MW-145BT / MW-260.

Outline fonts (MW-145BT / MW-260)**

[Parameters] Character width: The value of m is irrelevant.

Character size:

nL = 33, 38, 42, 46, 50, 58, 67, 75, 83, 92, 100, 117, 133, 150, 167,

200 or 233 dots

nH=0.

nL = 11 (267), 44 (300), 77 (333), 111 (367) or 144 (400) dots

nH=1.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 57 58

Pas de commentaire

Brother MW-260 Manuel d'utilisateur Page 27