Brother HL 2700CN Manuel d'utilisateur télécharger pdf (Page 141)

6 - 8 TROUBLESHOOTING

JAM A1 / JAM A2 (paper jam in the paper tray)

If there is a paper jam in the paper tray, follow these steps:

Pull out the paper tray.

Take out the jammed paper.

Figure 6-2

Put the paper tray back in the printer.

Open the back cover. If there is any jammed paper where the paper comes out, remove it.

Close the back cover.

■ Do not touch the toner surface of the jammed paper. It might stain your hands or clothes.

■ After removing the jammed paper, and the next printed page is stained with toner, print several

test pages before restarting your print job.

■ Remove the jammed paper carefully to prevent spreading toner.

■ Take care not to stain your hands and clothes. Wash toner stains immediately with cold water.

■ Never touch the transfer roller.

■ If the paper in the paper tray is creased at the edges, paper jams can occur. To prevent this,

please turn the paper over.

Do not use the following paper:

■ Bent/curled paper

■ Moist paper

■ Paper that does not meet specifications

JAM A1

JAM A2

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 161 162

Pas de commentaire

Brother HL 2700CN Manuel d'utilisateur Page 141