Brother HL 2700CN Manuel d'utilisateur télécharger pdf (Page 149)

6 - 16 TROUBLESHOOTING

Improving the print quality

If you are having problems with print quality, please do a test print first (press the Set button 3 times).

If the problem appears on the printout, then match it to one of the examples below and follow the

recommendation. If the problem does not appear on the test print, please check driver settings and the

interface cables as the problem may not lie with printer.

You can resolve a print quality problem by replacing a toner cartridge with a new one when the toner

indicators start blinking or the LCD shows the TONER EMPTY message.

Examples of poor print quality Recommendation

White lines or bands or ribbing

across the page

1) Check that the printer is on a solid level surface.

2) Check that the back cover is closed properly.

3) Check that the toner cartridges are installed properly.

4) Shake the toner cartridges gently.

5) Check that the transfer roller is installed properly.

6) Replace the transfer roller.

Colors are light or unclear on the

whole page

1) Check that the recommended paper was used.

2) Change the paper to freshly unpacked paper, and then check that the

problem is solved.

3) Check that the back cover is closed properly.

4) Shake the toner cartridges gently.

5) Clean the scanner dust glass.

White streaks or bands down the

page

Clean the dust proof glass.

Identify the missing color and replace that toner cartridge.

*The toner has probably reached the end of its life.

However, when you see a white vertical line on the toner roller, try the

following procedure.

1) Cut a sheet approx. 50mm x 50mm out of a transparency film.

2) Insert the film about 10mm into the gap between the toner roller and the

blade.

3) Slide the film and pull it out as shown below.

ABCDEFGHIJKLMNOPQRSTUVWXYZ. 0123456789. abcdefghijklmnopqrstuvwxyz.

1 2 ... 144 145 146 147 148 149 150 151 152 153 154 ... 161 162

Pas de commentaire

Brother HL 2700CN Manuel d'utilisateur Page 149