Brother DCP-385C Manuel d'utilisateur télécharger pdf (Page 87)

Troubleshooting and Routine Maintenance

81

B

Checking the print quality B

If faded or streaked colors and text appear on

your output, some of the nozzles may be

clogged. You can check this by printing the

Print Quality Check Sheet and looking at the

nozzle check pattern.

a Press Ink Management.

b Press a or b to choose Test Print.

Press OK.

c Press a or b to choose

Print Quality.

Press OK.

d Press Color Start.

The machine begins printing the Print

Quality Check Sheet.

e Check the quality of the four color blocks

on the sheet.

f Do one of the following:

 If all lines are clear and visible, press

+ to choose Yes, and go to step j.

 If you can see missing short lines as

shown below, press - to choose No.

g The LCD asks you if the print quality is

OK for black and three colors.

Press + (Yes) or - (No).

h The LCD asks you if you want to start

cleaning.

Press + (Yes).

The machine starts cleaning the print

head.

i After cleaning is finished, press

Color Start.

The machine starts printing the Print

Quality Check Sheet again and then

returns to step e.

j Press Stop/Exit.

If you repeat this procedure at least five

times and the print quality is still poor,

replace the ink cartridge for the clogged

color.

After replacing the ink cartridge, check

the print quality. If the problem still

exists, repeat the cleaning and test print

procedures at least five times for the

new ink cartridge. If ink is still missing,

call your Brother dealer.

CAUTION

DO NOT touch the print head. Touching the

print head may cause permanent damage

and may void the print head's warranty.

Note

OK Poor

i

When a print head

nozzle is clogged

the printed

sample looks like

this.

After the print

head nozzle is

cleaned, the

horizontal lines

are gone.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 121 122

Commentaires sur ces manuels

Pas de commentaire