Brother DCP-385C Manuel d'utilisateur télécharger pdf (Page 72)

Poor print quality Use only Genuine Brother Consumables as ink from other manufactures can

cause print quality problems.

Check the print quality. (See Checking the print quality on page 81.)

Make sure that the Media Type setting in the printer driver or the Paper Type

setting in the machine’s menu matches the type of paper you are using.

(See Printing for Windows

or Printing and Faxing for Macintosh

in the Software

User's Guide on the CD

-ROM and Paper Type on page 21.)

Make sure that your ink cartridges are fresh. The following may cause ink to clog:

 The expiration date written on the cartridge package has passed.

(Brother Original cartridge stay usable for up to two years if kept in their

original packaging.)

 The ink cartridge was in your machine over six months.

 The ink cartridge may not have been stored correctly before use.

Try using the recommended types of paper. (See Acceptable paper and other print

media on page 16.)

The recommended environment for your machine is between 20° C to 33° C.

White horizontal lines appear in text

or graphics.

Clean the print head. (See Cleaning the print head on page 80.)

Make sure you are using Brother Original Innobella™ ink.

Try using the correct types of paper. (See Acceptable paper and other print media

on page 16.)

If you want to print on Photo L or 10 × 15 cm paper, make sure you use the photo

paper tray. (See Loading photo paper on page 13.)

The machine prints blank pages. Clean the print head. (See Cleaning the print head on page 80.)

Characters and lines are stacked. Check the printing alignment. (See Checking the print alignment on page 82.)

Printed text or images are skewed. Make sure the paper is loaded correctly in the paper tray and the paper side

guides are adjusted correctly. (See Loading paper and other print media

on page 9.)

Make sure the Jam Clear Cover is closed correctly.

Smudged stain at the top centre of

the printed page.

Make sure the paper is not too thick or curled. (See Acceptable paper and other

print media on page 16.)

Smudged stain at the right or left

corner of the printed page.

Make sure the paper is not curled when you print on the back side of the paper

with the Print Odd Pages and Print Even Pages settings.

Printing appears dirty or ink seems

to run.

Make sure you are using the recommended types of paper. (See Acceptable paper

and other print media

on page 16

.) Don't handle the paper until the ink is dry.

If you are using photo paper, make sure that you have set the correct paper type.

If you are printing a photo from your PC, set the Media Type in the Basic tab of

the printer driver.

Make sure you are using Brother Original Innobella™ ink.

Stains appear on the reverse side

or at the bottom of the page.

Make sure the printer platen is not dirty with ink. (See Cleaning the machine printer

platen on page 79.)

Make sure you are using the paper support flap. (See Loading paper and other

print media on page 9.)

The machine prints dense lines on

the page.

Check Reverse Order in the Basic tab of the printer driver.

Printing (continued)

Difficulty Suggestions

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 121 122

Commentaires sur ces manuels

Pas de commentaire

Brother DCP-385C Manuel d'utilisateur Page 72

Commentaires sur ces manuels

Produits connexes et manuels pour Imprimeurs Brother DCP-385C