Brother DCP-7065DN Guide de l'utilisateur télécharger pdf (Page 19)

Routine maintenance

15

A

Checking the remaining life of

the drum unit A

You can see the machine’s parts life on the

LCD.

a Press Menu.

b Press a or b to choose one of the

following:

 3.Machine Info.

(DCP-7055 / DCP-7060D)

 4.Machine Info. (DCP-7065DN)

Press OK.

c Press a or b to choose one of the

following:

 4.Drum Life

(DCP-7055 / DCP-7060D)

 5.Drum Life (DCP-7065DN)

Press OK.

d Press Stop/Exit.

Note

The life check will be accurate only if you

have reset the part counter when you

installed a new part. It will not be accurate

if that part’s life counter was reset during

the life of the used part.

Packing and shipping

the machine A

Note

• If for any reason you must ship your

machine, carefully repack the machine in

the original packaging to avoid any

damage during transit. The machine

should be adequately insured with the

carrier.

• If you are returning your machine to

Brother as part of the Exchange Service,

pack only the machine. Keep all separate

parts, including the drum unit, the toner

cartridges, and printed materials to use

with your ‘replacement’ machine.

a Turn off the machine. Disconnect all the

cables, and then unplug the power cord

from the AC power outlet. Leave the

machine turned off for at least 10

minutes to cool down.

b Open the front cover.

c Remove the drum unit and toner

cartridge assembly. Leave the toner

cartridge installed in the drum unit.

1 2 ... 14 15 16 17 18 19 20 21 22 23

Commentaires sur ces manuels

Pas de commentaire