Brother HL-1430 Guide de l'utilisateur télécharger pdf (Page 79)

6 - 4 TROUBLESHOOTING

Paper handling

First, make sure that you are using paper that meets Brother recommended paper specifications. See

What kind of paper can I use? on page 1-5.

Problem Recommendation

The printer does not feed

paper from the tray1.

■ The paper tray may be out of paper or not properly installed. If it is empty, put

a new stack of paper in the paper tray.

■ If there is paper in the paper tray, make sure it is straight. If the paper is curled,

you should straighten it before printing. Sometimes it is helpful to remove the

paper, turn the stack over and put it back in the paper tray.

■ Reduce the amount of paper in the paper tray, and then try again.

■ Check that manual feed mode is not selected in the printer driver.

The printer does not feed

paper from the manual feed

slot.

■ Re-insert the paper firmly, one sheet at a time.

■ Make sure that manual feed mode is selected in the printer driver.

The printer will not feed

envelopes.

■ The printer can feed envelopes from the manual feed slot. Your application

software must be set up correctly to print on the envelope size you are using.

This is usually done in the page setup or document setup menu of your

software. Please see your software application manual.

A paper jam has occurred. ■ Clear the jammed paper. Please see Paper jams and how to clear them or the

paper jam instructional video on the CD-ROM.

The printer does not print to

the top output tray.

■ Close the rear cover.

The printer does not print on

the specified paper.

■ Make sure that the cable is connected to the printer.

■ Make sure that the appropriate printer driver is selected.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 94 95

Pas de commentaire

Brother HL-1430 Guide de l'utilisateur Page 79