Brother MFC-7840 Guide d'installation télécharger pdf (Page 27)

Installing the Driver & Software

Windows

Wireless

Network

Using the SecureEasySetup™, Wi-Fi Protected Setup™ or AOSS™

software to configure your machine for a wireless network

(one-push method)

If your wireless access point supports either

SecureEasySetup™, Wi-Fi Protected Setup™

(PBC

) or AOSS™, you can configure the machine

easily without a computer. By pushing a button on the

wireless router or access point, you can setup the

wireless network and security settings. See the user’s

guide for your wireless LAN router or access point for

instructions on how to access one-push mode. If your

wireless router or access point does not support

SecureEasySetup™, Wi-Fi Protected Setup™ or

AOSS™ go to the page 22 for installation

instructions.

Push Button Configuration

Note

Routers or access points that support

SecureEasySetup™, Wi-Fi Protected Setup™ or

AOSS™ have the symbols as shown below.

1 Plug the AC power cord into an AC outlet. Turn

the power switch on.

Improper Setup

If you have previously configured the wireless

settings of the machine you must reset the

network (LAN) settings before you can

configure the wireless settings again.

Press Menu, 5, 2, 6 (or Menu, 5, 0, 1) and then

press 1 to accept the change.

2 Place the Brother machine close to the

SecureEasySetup™, Wi-Fi Protected Setup™

or AOSS™ router or access point .

3 Push the SecureEasySetup™, Wi-Fi

Protected Setup™ or AOSS™ button on your

wireless router or access point. See the user’s

guide for your wireless router or access point

for instructions.

4 Press Menu, 5, 2, 3 on the control panel of the

Brother machine.

WLAN Enable?

1.On 2.Off

Press 1 to choose On. The wired network

interface will become inactive with this setting.

This feature will automatically detect which

mode (SecureEasySetup™, Wi-Fi Protected

Setup™ or AOSS™) your access point uses to

configure your machine.

Note

If your wireless access point supports

Wi-Fi Protected Setup™ (PIN Method) and you

want to configure your machine using the PIN

(Personal Identification Number) Method, see

Using the PIN Method of Wi-Fi Protected Setup™

in the Network User’s Guide.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

Brother MFC-7840 Guide d'installation Page 27

Commentaires sur ces manuels

Produits connexes et manuels pour Multifonctionnels Brother MFC-7840