1Basic Quilting Guide– Making a Quilt –c Fabric ... We recommend 100% cotton that is not too thick.c Quil
10After quilting, cover the edges with bias tape to finish them.Make bias tape with a finished width of 7 mm (1/4 inch).Draw a 35-mm-wide (1-3/8 inche
114In the same way, sew all along the edges and return to the folded back end of the bias tape. Cut off any excess bias tape.1 Overlap the fold.2 Exc
XF5444-0011English891-Z01Printed in China
2Refer to “Cutting Around Drawings” in the Operation Manual to specify a seam allowance and draw the pattern lines, and then cut out the pieces. Be su
3Memo● If you are using a sewing machine to make the quilt, refer to your machine’s instruction manual for information about the straight stitch, rev
4When sewing pieces together, sew to the corner of the stitching line.1Sew the pieces together. At the beginning of stitching, make a knot in the thre
5Using two types of fabric, prepare 4 square pieces from one and 5 from the other. (Refer to the illustration below.)Cut the pieces with a seam allow
6<Finished design>1Cut the appliqué pieces with a seam allowance applied. (Example: 4 hearts)2Make cuts 1 mm (1/16 inch) from the stitching line
7After the top (patchwork) is finished, draw the quilting lines.Use a quilting pencil or erasable pen to lightly draw the lines.Draw with a light col
8After drawing the quilting lines, overlap the backing fabric, quilt batting and top (patchwork), in order, and then baste them together.1Prepare quil
9From the center to the outside, sew symmetrically in the order shown in the illustration.1 Beginning of stitching1Insert the needle a short distance
Commentaires sur ces manuels