Brother HL 5170DN Manuel d'utilisateur télécharger pdf (Page 52)

CONFIGURING INTERNET PRINTING FOR WINDOWS

5 - 4

Brother Internet Print: Using BRAdmin to

Configure the Print Server

The steps required to configure the print server to receive print jobs

from a Windows

95/98/Me/2000/XP and Windows NT

4.0 PC

running the BIP software is as follows:

Start BRAdmin.

Select the node name of the desired Brother print server from

the list and double click on it. (the default node name is usually

BRN_xxxxxx, where xxxxxx is the last six digits of the

Ethernet address (MAC address)). You will be prompted for a

password; the default password is access.

Click on the POP3/SMTP tab.

Enter the address of the POP3 server (consult your network

administrator if you do not know this address).

Enter the mailbox name for the remote Brother print server.

Usually this will be the first part of the E-mail address (for

example, if the E-mail address of the print server is

emailprinter@xyz, then the mailbox name would be

emailprinter).

Enter the password for the mailbox, if any.

Skip this section if you wish to use the print server remote

console or Web Browser to configure the print server.

Using the BRAdmin application, you can configure the

Brother print server using the TCP/IP protocol, or the IPX

protocol.

You can find the node name and MAC address by printing

out the printer settings page. Refer to the Quick Setup Guide

for information on how to print the settings page on your print

server.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 134 135

Pas de commentaire

Brother HL 5170DN Manuel d'utilisateur Page 52