Brother HL 5170DN Manuel d'utilisateur télécharger pdf (Page 111)

10 - 11 TCP/IP CONFIGURATION

If you do not have any subnets, use one of the following default

subnet masks:

255.255.255.0 for class C networks

255.255.0.0 for class B networks

255.0.0.0 for class A networks

The leftmost group of digits in your IP address can identify the type

of network you have. The value of this group ranges from 192

through 255 for Class C networks (e.g., 192.189.207.3), 128 through

191 for Class B networks (e.g.,128.10.1.30), and 1 through 127 for

Class A networks (e.g., 13.27.7.1).

If you have a gateway (router), enter its address with the command

SET IP ROUTER routeraddress, where routeraddress is the

desired IP address of the gateway you wish to assign to the print

server. For example:

Local> SET IP ROUTER 192.189.207.1

Type SET IP METHOD STATIC to set the method of IP access

configuration to static.

To verify that you have entered the IP information correctly, type

SHOW IP.

Type EXIT or CTR-D (i.e., hold down the control key and type "D")

to end the remote console session.

Changing the IP Address Settings with the

TELNET Console

You can also use the TELNET command to change the IP address.

Using TELNET is effective way, when you change the IP address. But

a valid IP address must already be programmed into the print server.

If you are using the TELNET, you will be expected to enter the

password of the print server. Press RETURN and enter the default

password of access in response to the "#" prompt (it will not echo).

You will be prompted for a user name. Enter anything in response to

this prompt.

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 134 135

Pas de commentaire

Brother HL 5170DN Manuel d'utilisateur Page 111