Brother DCP-750CW Manuel d'utilisateur télécharger pdf (Page 19)

Installing the Driver & Software

Windows

Wired

Network

For Wired Network Interface Users

(For Windows

98/98SE/Me/2000 Professional/XP/XP Professional

x64 Edition)

Important

Make sure that you have finished the

instructions from Step 1 Setting Up the

Machine on page 4 through 11.

1 Disconnect the machine from the power

socket.

2 Using both hands, use the plastic tabs on both

sides of the machine to lift the scanner cover

until it locks securely into the open position.

3 Connect the network cable to the LAN socket

marked with a symbol. You will find the

LAN socket inside the machine on the left as

shown below.

4 Carefully guide the network cable into the

trench as shown below, following the trench

around and toward the back of the machine.

Then, connect the cable to your network.

Improper Setup

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Note

If both USB and LAN cables are being used, guide

both cables through the trench with one on top of

the other.

5 Lift the scanner cover to release the lock ( ).

Gently push the scanner cover support

down ( ) and close the scanner cover ( ).

6 Turn on the machine by connecting the power

cord.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 50 51

Pas de commentaire

Brother DCP-750CW Manuel d'utilisateur Page 19