Brother DCP-7065DN Guide de l'utilisateur télécharger pdf (Page 48)

Note

After replacing the toner cartridge, DO

NOT turn off the machine's power switch

or open the front cover until the LCD

returns to Ready mode.

Cleaning the corona wire A

If you have print quality problems, clean the

corona wire as follows:

a Open the front cover and leave the

machine turned on for 10 minutes to

cool down.

WARNING

HOT SURFACE

After you have just used the machine, some

internal parts of the machine will be

extremely hot. When you open the front or

back cover (back output tray) of the

machine, DO NOT touch the shaded parts

shown in the illustration. If you do this, you

may burn yourself.

b Slowly take out the drum unit and toner

cartridge assembly.

CAUTION

We recommend that you place the drum

unit and toner cartridge assembly on a

clean, flat surface with a sheet of

disposable paper or cloth underneath it in

case you accidentally spill or scatter toner.

Handle the toner cartridge carefully. If toner

scatters on your hands or clothes,

immediately wipe or wash it off with cold

water.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 111 112

Pas de commentaire

Brother DCP-7065DN Guide de l'utilisateur Page 48