Brother DCP-7065DN Guide de l'utilisateur télécharger pdf (Page 44)

Note

To force the machine to continue printing

after the LCD shows Replace Toner,

set the machine to Continue mode (Press

Menu, press a or b to choose 1.General

Setup and press OK, press a or b to

choose 4.Replace Toner, and press

OK, press a or b to choose Continue and

press OK). The machine will continue

printing until the LCD shows Toner

Ended. (For details about the Toner

settings, see Toner Settings in Chapter 1

of the Advanced User's Guide.)

Toner Ended A

Toner Ended

The machine stops printing until you replace

the toner cartridge with a new one. (See

Replacing the toner cartridge on page 30.)

Replacing the toner cartridge A

a Make sure that the machine is turned

on.

b Open the front cover and leave the

machine turned on for 10 minutes to

cool down.

WARNING

HOT SURFACE

After you have just used the machine, some

internal parts of the machine will be

extremely hot. When you open the front or

back cover (back output tray) of the

machine, DO NOT touch the shaded parts

shown in the illustration. If you do this, you

may burn yourself.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 111 112

Pas de commentaire

Brother DCP-7065DN Guide de l'utilisateur Page 44