Brother MFC-J5910DW Guide de l'utilisateur télécharger pdf (Page 10)

Changing your machine’s network settings

Note

• If the print server is set to its factory default settings (if you don’t use a DHCP/BOOTP/RARP server), the

device will appear as Unconfigured in the BRAdmin Light utility screen.

• You can find the Node Name and MAC Address (Ethernet Address) by printing the Network Configuration

Report. (See Printing the Network Configuration Report uu page 42 for information on how to print the

Network Configuration Report on your print server.) You can also find the Node Name and MAC Address

from the control panel. (See Control panel setup uu page 34.)

d Choose STATIC from Boot Method. Enter the IP Address, Subnet Mask and Gateway (if needed) of

your print server.

e Click OK.

f With the correctly programmed IP address, you will see the Brother print server in the device list.

Windows

Macintosh

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 84 85

Pas de commentaire

Brother MFC-J5910DW Guide de l'utilisateur Page 10