Brother Computerized Embroidery Machine Manuel d'instructions télécharger pdf (Page 74)

Attaching the Embroidery Foot 73

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Secure the embroidery foot with the presser

foot holder screw.

Set the embroidery foot perpendicular.

Firmly tighten the presser foot holder screw.

Turn the screwdriver toward the front.

CAUTION

● Do not hit the needle with your finger or

the embroidery foot when attaching it.

The needle may break or cause injury.

● Be sure to tighten the screw with the

included screwdriver. If the screw is

loose, the needle may hit the embroidery

foot and break or bend.

● Before embroidering, always turn the

handwheel toward you

(counterclockwise) slowly to make sure

that the needle does not hit the

embroidery foot. Otherwise, the needle

may break or bend.

F-combo-BrotherE_sgml.book Page 73 Thursday, November 17, 2005 3:39 PM

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 85 86

Pas de commentaire

Brother Computerized Embroidery Machine Manuel d'instructions Page 74