Brother Multi-Protocol Print Server Manuel d'utilisateur télécharger pdf (Page 38)

3 - 5 PEER TO PEER PRINTING

Adding a Second Brother LPR Port

You do not re-run the install program to add a new Brother LPR port.

Instead, click the Start button, select Settings, and open the

Printers window. Click on the icon of the printer that you wish to

configure, select File from the menu bar, and then choose

Properties. Click on the Details tab and click the Add Port button.

In the Add Port dialog, select the Other radio button and then

highlight Brother LPR port. Click OK and enter the port name. The

default port name is BLP1. If you have already used this name, you

will get an error message if you try to use it again, in which case use

BLP2, etc... Once you have specified the port name, click the OK

button. You will then see the Port Properties dialog.

Enter the IP address of the printer that you wish to print to and click

OK. You should now see the port that you have just created in the

Print to the following port setting of the printer driver.

Other Sources of Information

Visit http://solutions.brother.com for more information on

network printing.

Refer to chapter 10 of this User’s Guide to learn how to

configure the IP address of the printer.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 133 134

Pas de commentaire

Brother Multi-Protocol Print Server Manuel d'utilisateur Page 38