Brother DCP-130C Manuel d'utilisateur télécharger pdf (Page 7)

Setting Up the Machine

Note

When you use Legal size paper, press and hold

the universal guide release button as you slide out

the front of the paper tray.

5 Gently adjust the paper side guides with both

hands and the paper length guide to fit the

paper.

Make sure that the paper side guides and

paper length guide touch the edges of the

paper.

Note

Be careful that you do not push the paper in too

far; it may lift at the back of the tray and cause

paper feed problems.

6 Close the output paper tray cover.

7 Slowly push the paper tray completely into the

machine.

8 While holding the paper tray in place, pull out

the paper support ( ) until it clicks, and then

unfold the paper support flap ( ).

Note

Do not use the paper support flap for Legal paper.

3 Connecting the power cord

1 Connect the power cord.

Improper Setup

DO NOT connect the USB cable. Connecting

the USB cable is done during the software

installation process.

Note

The control panel warning LED will stay on until

you have installed the ink cartridges.

1 2 3 4 5 6 7 8 9 10 11 12 ... 21 22

Pas de commentaire

Brother DCP-130C Manuel d'utilisateur Page 7