Brother DCP-J125 Guide de l'utilisateur télécharger pdf (Page 41)

Routine maintenance

33

A

IMPORTANT

• DO NOT take out ink cartridges if you do

not need to replace them. If you do so, it

may reduce the ink quantity and the

machine will not know the quantity of ink

left in the cartridge.

• DO NOT touch the cartridge insertion

slots. If you do so, the ink may stain your

skin.

• If ink gets on your skin or clothing

immediately wash it off with soap or

detergent.

• If you mix the colours by installing an ink

cartridge in the wrong position, clean the

print head several times after correcting

the cartridge installation.

• Once you open an ink cartridge, install it in

the machine and use it up within six

months of installation. Use unopened ink

cartridges by the expiration date written on

the cartridge package.

• DO NOT dismantle or tamper with the ink

cartridge, this can cause the ink to leak out

of the cartridge.

Cleaning and checking

the machine

A

Cleaning the scanner glass A

a Lift the document cover (1). Clean the

scanner glass (2) and the white

plastic (3) with a soft lint-free cloth

moistened with a non-flammable glass

cleaner.

Note

In addition to cleaning the scanner glass

with a non-flammable glass cleaner, run

your finger tip over the glass to see if you

can feel anything on it. If you feel dirt or

debris, clean the glass again

concentrating on that area. You may need

to repeat the cleaning process three or

four times. To test, make a copy after each

cleaning attempt.

2

1

3

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 80 81

Commentaires sur ces manuels

Pas de commentaire