Brother DCP-1600 Guide de l'utilisateur télécharger pdf (Page 107)

100

4 Change the compatibility setting to Basic(for VoIP).

You may be able to send and receive faxes by lowering the connection speed.

a Press Menu, 2, 0, 1.

b Press a or b to choose Basic(for VoIP).

c Press OK.

d Press Stop/Exit.

NOTE

Brother does not recommend the use of a VoIP line. VoIP limitations in general can cause

some functions of the fax machine not to work correctly.

If, after trying all of the above the problem is still not resolved, turn the machine off, and then turn

it on.

If you still cannot send or receive faxes after trying all of the above, check the FAQ on the

Brother Solutions Center website (http://support.brother.com

Troubleshooting for other problems

Question Answer

Cannot receive a fax. If you have a dedicated fax line and want your Brother machine to automatically

answer all incoming faxes, you should choose Fax Only.

Can I set the machine not to print

the Transmission Verification

report?

This product will print a Transmission Verification repor

Even if the Transmission Verification report is set to Off, a report is printed when

there is a communication error.

If the Journal Period is set to Off, Fax Journal are not printed.

Can I cancel the fax job? Press Stop/Exit to cancel the fax or Menu 2, 6 (for India and Vietnam), Menu 2,

7 (for Other countries) to cancel the remaining jobs.

Poor sending quality. Try changing your resolution to Fine or S.Fine, or clean the scanner.

Sent faxes are blank. Make sure you are loading the document correctly. The document should be face

down when using the ADF or the scanner glass. See Loading documents

on page 67.

Vertical black lines when sending. Black vertical lines on faxes you send are typically caused by dirt or correction

fluid on the glass strip. See Clean the inside of the machine. on page 102.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 135 136

Pas de commentaire

Brother DCP-1600 Guide de l'utilisateur Page 107