Brother COMPACT OVERLOCK MACHINE Manuel d'utilisateur télécharger pdf (Page 45)

www.brother.com

Brother

Serger/

Overlock

Feet

Blind Stitch Foot

Gathering Foot

Brother

Serger/

Overlock

Feet

Overlock

not only for hemming, but also for decorating.

Brother overlock machines are easy enough for sewing beginners, yet satisfying

enough

for professionals. Attach feet to produce decorative effects!

X76590-002, X76661-001

Blind Stitch Foot

For trimming edges, finishing and hemming in one operation.

Blind stitching:

1. While folding the fabric by hand, sew so that the needle just catches the folded edge.

2. Open up the fabric.

Flatlock stitching for medium weight to heavyweight fabric:

1. Fold the fabric and insert it into the material guide on the front of the foot.

2. Adjust the material guide so that the needle moves down at the position 2.5 - 3.0 mm

inside the folded edge.

3. Pull the fabric open (flat).

SA213

X77459-001

Gathering Foot

Set two pieces of the fabric, one on top and the other on the bottom of

the guide of presser foot. It gathers the fabric on the bottom as sewing

both in one operation.

1. Set the machine setting, 3/4 thread overlock, stitch length to 3 mm, stitch width to

2 mm from 5 mm, and differential ratio to 1 from 2.

2. Place the bottom fabric (the fabric will be gathered) under the guide on the front of the

gather foot.

3. Place the top fabric (the fabric will not be gathered) between the guide and the foot.

4. Sew while keeping the fabrics aligned.

X76590-002 is compatible with 3034D, 1034D, PL1050, PL1500, M640D, M929D, M9600TD and M9700D.

X76661-001 is compatible with PL1600, PL2100 and M9800LD.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 57 58

Pas de commentaire

Brother COMPACT OVERLOCK MACHINE Manuel d'utilisateur Page 45