Brother MFC J6910DW Manuel d'utilisateur télécharger pdf (Page 62)

Chapter 6

48

Using a non-Brother cordless

external telephone 6

If your non-Brother cordless telephone is

connected to the EXT. jack of the machine

and you typically carry the cordless handset

elsewhere, it is easier to answer calls during

the Ring Delay.

If you let the machine answer first, you will

have to go to the machine so you can press

Hook to send the call to the cordless handset.

Using remote codes 6

Fax Receive Code 6

If you answer a fax call on an extension

telephone, you can tell your machine to

receive it by dialing the Fax Receive Code

l 51. Wait for the chirping sounds and then

replace the handset. (See Easy Receive

on page 39.)

If you answer a fax call at the external

telephone connected to the EXT. jack of the

machine, you can make the machine receive

the fax by pressing Black Start and choosing

Receive.

Telephone Answer Code 6

If you receive a voice call and the machine is

in Fax/Tel mode, it will start to sound the F/T

(pseudo/double) ring after the initial Ring

Delay. If you pick up the call on an extension

telephone you can turn the F/T Ring off by

pressing #51 (make sure you press this

between the rings).

If the machine answers a voice call and

pseudo/double-rings for you to take over, you

can take the call at the external telephone

connected to the EXT. jack of the machine by

pressing Hook.

Changing the remote codes 6

The preset Fax Receive Code is l 51. The

preset Telephone Answer Code is #51. If

you want to, you can replace them with your

own codes.

a Press MENU.

b Press a or b to display Fax.

c Press Fax.

d Press a or b to display

Setup Receive.

e Press Setup Receive.

f Press a or b to display Remote Codes.

g Press Remote Codes.

h Press On (or Off).

i Do one of the following.

 If you want to change the Fax

Receive Code, enter the new code.

Press OK. Go to step j.

 If you do not want to change the Fax

Receive Code, press OK. Go to

step j.

j Do one of the following.

 If you want to change the Telephone

Answer Code, enter the new code.

Press OK. Go to step k.

 If you do not want to change the

Telephone Answer Code, press OK.

Go to step k.

k Press Stop/Exit.

Note

• If you are always disconnected when

accessing your external TAD remotely, try

changing the Fax Receive Code and

Telephone Answer Code to another three-

digit code (such as ### and 999).

• Remote Codes might not work with some

telephone systems.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 162 163

Commentaires sur ces manuels

Pas de commentaire