Brother MFC 9970CDW Manuel d'utilisateur télécharger pdf (Page 157)

Appendix A

Using RARP to configure the IP address A

The Brother print server’s IP address can be configured using the Reverse ARP (RARP) facility on your host

computer. This is done by editing the /etc/ethers file (if this file does not exist, you can create it) with an

entry similar to the following:

00:80:77:31:01:07 BRN008077310107 (or BRW008077310107 for a wireless network)

Where the first entry is the MAC Address (Ethernet Address) of the print server and the second entry is the

name of the print server (the name must be the same as the one you put in the /etc/hosts file).

If the RARP daemon is not already running, start it (depending on the system the command can be rarpd,

rarpd -a, in.rarpd -a or something else; type man rarpd or refer to your system documentation for

additional information). To verify that the RARP daemon is running on a Berkeley UNIX based system, type

the following command:

ps -ax | grep -v grep | grep rarpd

For AT&T UNIX-based systems, type:

ps -ef | grep -v grep | grep rarpd

The Brother print server will get the IP address from the RARP daemon when the machine is powered on.

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 163

Pas de commentaire

Brother MFC 9970CDW Manuel d'utilisateur Page 157