Brother MFC 9970CDW Manuel d'utilisateur télécharger pdf (Page 5)

5

4

Connect the power cord

and telephone line

a Connect the AC power cord to the machine,

and then plug it into an AC power outlet.

b Remove the label covering the machine's

power switch, and then switch the machine on.

c Connect the telephone line cord. Connect one

end of the telephone line cord to the jack on the

machine marked LINE and the other end to a

modular wall jack.

WARNING

The machine must be grounded using a

3-prong plug.

Since the machine is grounded through the

power outlet, you can protect yourself from

potentially hazardous electrical conditions on

the telephone network by keeping the power

cord connected to your machine when you

connect it to a telephone line. Similarly, you

can protect yourself when you want to move

your machine by disconnecting the telephone

line first and then the power cord.

IMPORTANT

DO NOT connect the interface

cable yet.

IMPORTANT

The telephone line cord MUST be connected

to the jack on the machine marked LINE.

Note

If you are sharing one telephone line with an

external telephone, connect it as shown below.

Before you connect the external telephone,

remove the protective cap a from the EXT. jack

on the machine.

1 Extension telephone

2 External telephone

1

2

1

1 2 3 4 5 6 7 8 9 10 ... 37 38

Commentaires sur ces manuels

Pas de commentaire