Brother MFC-7225N Manuel d'utilisateur télécharger pdf (Page 33)

5 - 1

Internet printing for Windows

Overview

Windows

2000/XP users can print using TCP/IP using the standard Network Printing software and IPP

protocol software built into any Windows

2000/XP installation.

Note

• You must configure the IP address on your machine before you proceed with this chapter. If you

haven’t done yet, see Chapter 2 first.

• Verify the host computer and print/scan server are either on the same subnet, or that the router is

properly configured to pass data between the two devices.

• The default password for Brother print/scan servers is access.

Windows

2000/XP IPP printing

Use the following instructions if you wish to use the IPP printing capabilities of Windows

2000/XP.

For Windows

2000: Go to the Start button, select Settings and then Printers.

For Windows

XP: Go to the Start button and select Printers and Faxes.

For Windows

2000: Double click the Add Printer icon to get the Add Printer Wizard.

For Windows

XP: Double-click Add a printer to get the Add Printer Wizard.

Click Next when you see the Welcome to the Add Printer Wizard screen.

Select Local printer or Network printer. For Windows

2000: Make sure that you select Network

Printer.

For Windows

XP: Make sure that you select A network printer, or a printer attached to another

computer.

Click Next.

For Windows

2000: Select Connect to a printer on the Internet or on your intranet and then enter

the following in the URL field: http://printer_ip_address:631/ipp (Where

printer_ip_address is the IP address or the print/scan server name).

For Windows

XP: Select Connect to a printer on the Internet or on a home or office network and

then enter the following in the URL field: http://printer_ip_address:631/ipp (Where

printer_ip_address is the IP address or the print/scan server name).

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 55 56

Pas de commentaire

Brother MFC-7225N Manuel d'utilisateur Page 33