Brother P-touch 7500VP Guide de l'utilisateur télécharger pdf (Page 24)

After selecting the Label Type mode NORMAL or VERTICAL, the label text can be

entered, formatted, printed and cut as usual. With the Normal Label Type mode, the

entered text is printed horizontally along the label. With the Vertical Label Type mode,

the entered text is printed vertically along the label.

Rotate and Rotate & Repeat Modes

Labels printed using these Label Type modes can be

wrapped around cables and wires to mark them. With both

of these modes, the text is rotated 90° anti-clockwise and

each text block printed on a separate label as shown below.

With the Rotate & Repeat mode, the text is printed

repeatedly along the length of the label so that it can easily

be read from any angle.

After selecting the ROTATE or R & REP. Label Type mode, specify the length of each

label and a frame style if desired.

● BL. LEN. (block length): 20.0 to 200.0 mm

Default: 30.0 mm

● FRAME: OFF, , , ,

Default: OFF

☞ A single block of text can contain a maximum of 7 text lines, and with the R & REP.

Label Type mode, only the text lines that fit within the label are printed.

☞ For labels to be attached to cables and wires, we recommend using Flexible ID Tape.

When wrapping Flexible ID Tape around cylindrical objects, the diameter of the

object should be at least 3 mm, otherwise the FLAG Label Type mode should be

used. In addition, the overlapping ends of the label or the flag length should be at least

5 mm.

Rotate

Repeat

Block length

Block lengthBlock length

1 2

3 4

PT75007600uk.book Page 14 Monday, February 25, 2008 6:04 PM

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 103 104

Pas de commentaire

Brother P-touch 7500VP Guide de l'utilisateur Page 24